Power Mastic
Packing: KG, 5 KG, 10 KG, 25 KGDescription
Two pack mastic for marble and stone based on unsaturated polyester resins, it hardens quickly adding its hardener. It has good adhesive power, its fluidity allows penetrating in the hollowness and porosity of the stone. After hardening, it can be worked as the stone. It can be colored using paste coloring tubes and coloring oxide powders; it is resistant to the most of chemical products such as oils, fats, detergents, solvents A premium range, Very thin, Polyester resin based glue for filling of joints, cracks & holes. Gives a very fine finish to joint & Cracks.
Download TDSMix the mastics with hardener in required proportion and apply the mixture by putty blade on the joints, cracks & holes (for colour matching mix proportionate amount of colour pigment).
Instruction to use:
- The area to be glued or filled must be clean, perfectly dry and dust free.
- Add 2% paste hardener in weight to the mastic, mix thoroughly until a homogenous mass is obtained and apply with a spatula on horizontal or vertical surface.
- in cold season the hardener may increase up to 3%.
- once hardened after a couple of hours, the mastic can be grinded and polished.
- for materials with porosity or holes very big(travertine), we suggest to make a second application.
Suggestion for use
- Do not use the hardener more than 4% as it will reduce adhesion of the product, it also reduces working time and could cause a colour variation.
- Never mix the total quantity of the mastic at one time in order to avoid, 'Mass effect” because the mastic will dry quickly too.
- Do not use hardener in quantity less than 1% and /or at low temperature below 5 'o C, which catalysing time very long.
What can we do for you?
