Products

• Hard and durable joints
• Temperature resistant
• Stain free
• Non-cracking or powdering
• Water is cleanable when it is fresh
• Available in a range of attractive colors
• Chemical-resistant

• Before starting to grout, remove debris from the grout joints and lightly sponge the tile
• Clean the surface to remove dust and dirt
• Do not clean tiles with acid cleaners, since this may affect the overall shade of the grout

• Empty the entire contents of Epoxy grout Parts A and B into a clean mixing pan or saturated tin
• Mix both Parts A and B well before commencing the grouting work
• Mix with a trowel by the manual method or by a slow-speed stirrer mixer, maintaining an rpm not exceeding 300-400
• Add Part-C (coloured powder) as required to get a uniform consistency
• Mix the material as stiffly as possible to work into the joints

• Using a rubber float or grout filling accessories, fill the tile joints as per standard epoxy grouting techniques
• Be sure all tile joints are packed full
• Remove all excess material before the initial cleaning (40-50 minutes) with a grout float
• Do not leave excess grout on the face of tiles, since this will lead to material setting and therefore make it difficult to clean
• While the application is done on open areas like swimming pools, it is recommended to keep the working area covered and protected from direct sunlight for 7 days until the pools are filled with water

• Remove all excess grout from the tile surface with the edge of the grout float
• The direction to use the grout float should be at a 90˚angle diagonally across the joints and tile to avoid pulling out the material
• Initial cleaning should commence after 40-50 minutes of grouting
• Using clean water, scrub the tile surface and joint width to remove any excess grout and get a smooth finish
• After 24 hours, do a final cleaning with normal soap and water to remove any haze from the tile

Please refer to the coverage chart, as it depends on the tile size, joint width, and depth.

Packed containers of this product are guaranteed to be of first quality for 2 years if stored at temperatures >32˚F (0˚C) and <110˚F (43˚C).

• During low temperatures (the winter season), the curing of grout will take time; hence, finished work should be covered from traffic until fully cured
• Since poxy grout contains an epoxy base and hardener, it may cause eye and skin irritation until it is cured
• Keep out of reach of children
• In case of contact with eyes or skin, flush thoroughly with water